| |
|
| Model
HD Die Cushion is very popular with the stamper who has
a wide variety of jobs and who must frequently change dies. |
|
FEATURES:
* Booster Pump supplied as standard equipment to double shop air pressure
to achieve high ring holding forces.
* The unit has an exclusive adjustable stroke feature that allows
the operator to adjust the die cushion draw up to 2" rather than
changing pressure pins for length when a different job is set-up
* Mounting may be made to bolster plate, to the press frame or to
the bed superstructure.
* Construction is of steel, welded and normalized, with bronzed bearing
surface.
* Standard pin pads are throuh hardened and ground. Types are available
in round, rectangular or square shapes at customer option.
* Lubrication fittings are positioned at the front of the lower flange
on standard designs. An external centralized greasing system is available
at customer option.
* The unit features excellent guiding by use of an internal cylinder
rod, and generous cylinder to piston overlap. An external guiding
mechanism is available at customer option.
* Furnished complete with pin pad, mounting structure, surge tank,
regulator, gauge hoses, fittings, booster pump and Installation Service
Manual.
* Each installation is warranted for one year from date of shipment. |
|
|
|
Dayton
Die Cushions
dayton@daytondiecushions.com