Dayton Die Cushions
6330 Industrial Dr, Eden Prairie Mn 55346, USA
dayton@daytondiecushions.com
Home
Install/Operation
Parts
Service
About Us
 Die Cushion Models
>> Model HC
 
 
>>Products >>Models >>Model HC

Model HC Die Cushion produces very high Ring Holding Force within a given area. The unit is built to withstand extremely long, heavy stamping and forming operations such as compound blanking, piercing and drawing.

FEATURES:
* Operates at 200 psi. pressure with booster pump.
* Mounting may be made to the bolster plate, to the press frame, or to the bed superstructure.
* Construction is of steel welded and normalized with bronzed bearing surface. Excellent internal guiding achieved by generous overlap between cylinder and piston, and external guiding mechanism can be designed to insure against off-center loading conditions.
* In batteries, common pin pads may be used. Special raised pin pads may be designed for use with presses with smaller than normal bed openings.
* Furnished complete with pin pad, mounting structure, regulator, gauge, hoses, fittings, surge tank with accessories and Installation and Service Manual.
* Each installation is warranted for one year from date of shipment.
More Information:
Model HC Catalog
3D Model of HC Type Die Cushion

 

 
Catalogs
Model C
Model D
Model HC
Model HD
Model MC
Model MD
Model HMC
Entire Catalog